Improving the accuracy of test results is Skyray's constant commitment to provide users with the best possible service and advanced capabilities of scientific instruments. The newly developed EDX 3600 spectrometer is based on this idea. It is designed and built with five characteristics of "accurate, fast, non-destructive, intuitive and environmentally friendly" Skyray EDX series spectrometers. The SNE noise reduction module has been added, which ensures stable test results and increased accuracy.
Operational characteristics Vacuum chamber The air must be pumped out of the sample chamber using a vacuum pump when testing the sample for light elements with low content The vacuum pump is supplied complete with a spectrometer Maximum vacuum: 6 x 10-2Pa Rotation speed: 1400rpm Suction speed: 1 l/sec Pump power: 0.25 kW Large sample chamber Triple radiation leakage protection mode Independent correction model of matrix effects Multivariate nonlinear regression procedure Additional arbitrary analysis and identification of the model Electrical block diagram with high signal-to-noise ratio Highly efficient X-ray tube Professional software for X-ray fluorescence analysis for multi-element measurements Noise-canceling SNE module Automatic change of collimators and filters Technical Specifications Measuring range: 1PPM-99.99% Accuracy of determination of the deposition thickness: 0.005um Testing time: 60--300 sec. Accuracy: 0.05% (above 96%) The range of elements: Na~U, the detection limits of RoHS analysis by Cd,Pd,Cr,Hg,Br reach 1PPM Measured substances: powdery, solid, liquid substances Voltage: 15~50kV Pipe electric current: 50~1000uA Weight: about 80 kg Power: 50W Semiconductor detector with electric cooling system Improved sensor for metal research Relative humidity: <70% Voltage: AC 100V/220V Standard configuration Vacuum sealed sample chamber Silicon SDD Detector Electrical Circuit Signal Detection Electronics High and low voltage power supply Software X-ray tube Scope of application, analysis: Scientific research, quantitative and qualitative analysis of substances, routine studies, RoHS analysis, coating and spraying studies, analysis of heavy metals in soils, water, air; diagnostics and detection of defects in wear products, determination of trace elements in blood, etc., analysis in the control of raw materials, production technologies, production quality control, food quality control products and heavy metals in products, geological analysis, mineral research and analysis, identification of precious metals: gold, silver, platinum, etc, quality monitoring and quality control in the production of structural materials, such as cement, glass, forensic medical examination and technical assessment in security systems, environmental studies, archaeology, chemistry, electronics, and much more.
